Manufactured on the basis of high-quality European raw materials on the Italian production technology
Ideas for decorative coatings for any interior
A line of exquisite decorative coatings and plasters produced using Italian technologies and raw materials.
Moisture-resistant interior latex paint specifically designed for painting walls and ceilings in rooms with high humidity, such as bathrooms, kitchens, hallways. Prevents the appearance of moulds and fungus, contains antifungal components. Excellent resistance to dirt and mechanical effect (to scratches, abrasions, etc.). It is recommended for painting rooms with high loads.
ELEMENT universal rubber paintis made on the basis of a special dispersion, due to which it has high adhesion to various materials. The paint has high abrasion resistance (class 1 according to DSTU EN 13300), as well as increased water resistance. Does not contain organic solvents and has no unpleasant odor. Has high adhesion to the following types of surfaces: mineral (plaster, putty, concrete and aerated concrete, asbestos cement, gypsum surfaces, brick, stone); metal (aluminium, galvanized metal, primed ferrous metal, cast iron); wood and wood derivatives (plywood, fiberboard, chipboard, QSB and OSB). Can be used on slate, bitumen slate, wallpaper; surfaces painted with alkyd, oil and water-dispersion paints. Due to its unique properties, it is recommended for a wide range of works: painting roofs made of corrugated sheets, galvanized metal, tiles and metal tiles; fences, plinths. However, it cannot be used to cover the floor! PREPARING THE SURFACE FOR PAINTING: Remove dust, remaining limescale and other contaminants from the surface. Remove fungus and mold using a special product and treat with an antiseptic solution according to the instructions. Fresh cement plaster must be cured for at least 28 days, and concrete for at least 3 months. Sand and remove dust from durable alkyd and oil-based coatings. Treat the surfaces with a deep-permeable primer. PREPARATION OF BASICS FOR METAL: Clean the surface from scale, rust, fragile coatings and dirt. If necessary, degrease using alkaline solutions or organic solvents. To increase the service life of the coating, it is recommended to treat ferrous metal with a layer of anti-corrosion primer. PREPARATION OF WOOD BASES: the substrate must be clean and dry. If there is fungus, mold or when used in a humid environment, treat the wood with a special product according to the instructions. METHOD OF USE Before using rubber paint, you need to mix it thoroughly. Apply by brush, roller or spray, including airless method, in 2-3 layers. You can thin it with water (up to 5%). Work can be carried out at surface and air temperatures from +5 to +30°C and at relative air humidity below 80%. Do not apply paint to surfaces exposed to direct sunlight, strong wind, or precipitation. Protect painted surfaces from precipitation until the paint has completely dried for at least 24 hours. Rinse tools with water immediately after finishing work. LOSE PAINT TO A SINGLE LAYER COATING Consumption per layer for smooth metal and wooden surfaces is 100-180 g/m2, for mineral surfaces about 100 g/m2 depending on the grain size of the base. The exact consumption is determined by test painting on site. The drying time of one layer of coating before applying the next is 2 hours, full strength and ability to withstand mechanical loads is after 28 days, at an ambient temperature of +20°C and a relative air humidity of 60%. In other conditions, the drying and curing times may change; with a decrease in temperature and an increase in humidity, the time will increase. COMPOSITION Specialized acrylic dispersion, titanium dioxide, pigments, functional admixtures, mineral fillers, water. The maximum permissible concentration of volatile organic compounds (VOCs), according to the Technical Regulations of Ukraine for limiting VOC emissions, for this product (subcategory A/4): 150 g/l (from 2021) and 130 g/l (from 2024). ELEMENT rubber paint contains 40 g/l VOC. STORAGE CONDITIONS AND PRECAUTIONS: Store in a tightly closed container in a cool place, at a temperature from +5°C to +30°C, avoid direct sunlight on the container. Keep out of the reach of children. When applying, follow normal safety precautions; use gloves and glasses. When spraying, do not inhale vapors, use a respirator. In case of contact with eyes or skin, rinse immediately with clean water.
Interior latex paint, ultra white and matt. It creates a snow-white coating, hides minor defects, smooths the surface. Specifically recommended for treatment of ceilings.
Latex interior high coverage paint, white, matt. It features high coverage ability. Elastic, easy to apply. It is recommended for painting the wallpapers.
ELEMENT 1 dispersion paint with a high coating ability, for interior work. It is intended for primary or repair painting of plastered, concrete, brick, gypsum plasterboard, wood-fiber indoor surfaces. It is used for painting walls and ceilings in dry rooms with low operating loads.
Matte latex paint with high coating properties, wear-resistant for interior works, for painting all durable, clean and dry interior wall surfaces and ceilings free from contaminants and segregating substances (e.g. fats). "ELEMENT 2" paint has a high degree of whiteness and can be used both in the primary form and tinted in pastel colours with water and multi-purpose pigment pastes. It is easy to apply with a brush, roller, or a spray gun.
ELEMENT 3 is particularly wear-resistant, water-dispersion latex paint for interior work. It is intended for primary or repair painting of plastered, concrete, brick, gypsum plasterboard, wood-fiber indoor surfaces. It is used for painting walls and ceilings in dry and damp rooms. Resistant to wet cleaning, can withstand up to 3,000 washing cycles with the use of detergents and disinfectants.
ELEMENT 7 is particularly wear-resistant, water-dispersion latex paint for interior work. It is intended for primary or repair painting of plastered, concrete, brick, gypsum board, fibreboard indoor surfaces. It is used for painting walls and ceilings in dry and damp rooms with a high operating load. Great for painting wallpapers and other textured surfaces. Resistant to wet cleaning, can withstand up to 5,000 washing cycles with the use of detergents and disinfectants.
ELEMENT Classic Interior paint, Matte, water-dispersion paint. It is used for primary and repair painting of plastered, concrete, puttied, brick and plasterboard surfaces in dry rooms with low operating loads.
ELEMENT Classic Washable interior paint, matte, water-dispersion, with a high degree of whiteness. It is used for painting all durable, clean and dry indoor wall surfaces and ceilings in rooms with high operating loads. It is recommended for painting ceilings.
Latex interior paint, especially moisture resistant, white, silky-matt featuring a high degree of wear resistance. It has a high covering ability. It is used for painting of walls and ceilings in rooms with a high operational load. It withstands mechanical and wet cleaning with detergents. Used both in the original form and tinted with water and universal pigments.
Silky-matt interior latex high durability paint. It is used for painting of walls and ceilings in rooms with a high operational load. Smooth and strong coating can be easily removed. White (Base A). Used only tinted with water and universal pigments.
Silky-matt interior latex high durability paint. It is used for painting of walls and ceilings in rooms with a high operational load. Smooth and strong coating can be easily removed. Used only tinted with water and universal pigments.
Interior water-dispersion latex paint with a high degree of wear resistance. Creates a thin-layer durable coating resistant to mechanical and wet abrasion, perfectly highlights the substrate. It is recommended for painting wallpapers, decorative coatings and plasters and other textured coatings. Thixotropic, does not spread, is easily applied.
Interior water-dispersion latex paint with a high degree of wear resistance. Creates a thin-layer durable coating resistant to mechanical and wet abrasion, perfectly highlights the substrate. It is recommended for painting wallpapers, decorative coatings and plasters and other textured coatings. Thixotropic, does not spread, is easily applied.
Water-dispersion silky-matt latex paint, specially designed for kids rooms. It is well washed. Dirt can be easily removed; its coverage ability is high. It is eco-friendly, contains no hazardous substances, non-allergic. Suitable for painting of wallpapers and textured surfaces. Recommended for painting of walls and ceilings in schools, preschool and medical institutions, - wherever sanitary and hygienic requirements are strict.
ELEMENT paint for children's rooms, is ecologically clean, velvety and matte, water-dispersion latex paint for interior works. Wear-resistant, resistant to wet cleaning with the use of soft detergents, without loss of decorative and physical properties. Great for painting wallpapers and other textured surfaces. It is recommended for use in schools, preschool and medical institutions, in premises with strict sanitary and hygienic requirements.
See how to apply decorative plasters