VIVACOLOR paints are produced at Tikkurila enterprises (FINLAND and SWEDEN). They have five degrees of environmental certification, among which the Nordic Swan Ecolabel is the most demanding standard of Scandinavian environmental norms.
VIVACOLOR products are tinted in more than 2,000 shades according to Tikkurila Symphonia color cards, one of the most advanced color systems on the market.
Vivacolor
Vivacolor
from 788 hryvnias
from 542 hryvnias
from 534 hryvnias
from 614 hryvnias
from 638 hryvnias
from 688 hryvnias
from 598 hryvnias
from 898 hryvnias
from 788 hryvnias
from 448 hryvnias
Add originality to your repairs
70+
Ideas for decorative coatings for any interior
Related products
To protect the surface
Water-dispersed matte paint for wood and metal Universal Akva Matt
Universal Akva Matt is a water-dispersion matte paint for wood and metal, characterized by high adhesiveness and weather resistance. It is characterized by the strength and wear resistance of the coating. Advantages of paint for wood and metal: Paint consumption 8-10 m2/l when used on smooth wood and metal surfaces. The paint can be diluted with water up to 10% of the volume. The paint can be used white (base A), and can also be tinted in light shades (base A). Drying time 1 hour - touch dry, 24 hours - before applying the next layer, 2-3 days - complete drying. Work is carried out at a temperature of 23˚C and a relative humidity of 50%. Dry residue - approximately 40%. Preparation of previously unpainted surfaces Clean the surface from dust and dirt. Patch up the uneven areas with putty, sand and remove dust. Prime porous, putty, non-uniformly absorbing surfaces, as well as plasterboard and particle boards with water-dispersion paint. Metal surfaces must be primed with metal primer. Weak surfaces covered with chalk putty should be primed with an alkyd primer. Preparation of previously painted surfaces Remove any loose paint. Wash the surface with an aqueous cleaning solution, rinse with water and let dry. Sand hard, glossy surfaces until matte, remove dust. Weak surfaces covered with chalk putty must be primed with an alkyd primer. Fill cracks and irregularities with putty, sand and remove dust. Prime the putty surfaces. Staining conditions The surface to be painted must be clean and dry (wood moisture content below 20%), air temperature from +5 to +28˚С, relative air humidity 80%. Do not paint in hot weather or in direct sunlight. Universal Akva Matt paint must be thoroughly mixed before use. To obtain a uniform tone, you need to mix a sufficient amount of paint from different cans. Paint in 2 layers with a roller, brush or spray paint.
from 898 hryvnias
Villa Protekt antiseptic primer for wood
Villa Protekt antiseptic primer for wood is deeply absorbed into the wood. Slows down the absorption of moisture and the spread of mold on the treated surface. Suitable for both professional use and private users. This primer is used to impregnate sawn and planed wooden surfaces, timber, cladding boards, doors, window frames, fences, cornices and other external wooden surfaces before their subsequent finishing. Suitable for heat-treated wood. Cannot be used on interior surfaces of greenhouses. Application conditions Remove any loose paint and clean the surface of dust and dirt with a water-based cleaning solution. Processing of new wood should be carried out at an early stage of construction work. Villa Protekt must be mixed thoroughly before use. Apply in one layer with a brush, moving along the grain of the wood or by immersion. Particular care must be taken to process the edges and ends of the boards. Before treatment, you need to protect plants and shrubs from splashes. Transparent impregnation does not protect against UV rays, so we recommend painting impregnated wooden surfaces as soon as possible. Drying time: 30 minutes – protected from dust; 24 hours – ready for painting. Low temperature and humidity slow down drying time.
from 788 hryvnias
Special Solvent
Special Solvent is a thinner for alkyd and oil-based paints and varnishes. Suitable for cleaning work tools and small surfaces. The product is frost resistant. The product has almost no odor. The big advantage is that the solvent has a low content of aromatic hydrocarbon compounds. Special Solvent should be stored in tightly closed original manufacturer's containers. It is also necessary to prevent direct sunlight.
from 448 hryvnias
Facade glaze Villa Lasur
Translucent alkyd glaze VIVACOLOR Villa Lasur 2.7 l for wood. Protects wood from moisture, UV rays (tinted), emphasizes the wood pattern. Purpose: new and previously treated with wood preservative sawn and planed external wooden surfaces (sheathing boards, logs, fences, doors, windows, garden furniture, etc.). Advantages and properties of facade glaze: it is a ready-to-use translucent mass; protects wood; decorates and decorates; tinted in more than 1500 shades; manufactured using Finnish technology; resistant to atmospheric influences and UV radiation (in tinted form); emphasizes the wood pattern; consumption for one layer: 4-8 m²/l - sawn, 8-12 m²/l - planed, log surfaces; applied with a brush or sprayed along the wood grain; can be applied to both vertical and horizontal surfaces. Rules for the application of facade glaze Villa Lasur glaze is easy to apply to vertical or horizontal surfaces, always along the wood grain. The moisture content of the wood itself should be up to 18%. For convenience, the cans in 2.7 l and 9 l containers have a reusable valve that allows hermetically sealed storage of product residues. After finishing the work, wash the brush with VIVACOLOR Special Solvent. Step-by-step application: Apply one coat of Villa Protekt as a primer. After 24 hours, one coat of Villa Lasur in color. Then knock the pile off the surface with Scotch-Brite or P320 sandpaper. After another 24 hours, apply a second coat of Villa Lasur in the same color. A wooden house covered with VIVACOLOR Villa Lasur glaze will retain its first-class appearance for more than 5 years. Upon reaching the five-year period, light sanding should be performed and one coat of glaze in color should be applied.
from 788 hryvnias
Absolutely matte facade paint Hansa Facade
Hansa Facade LA 0.9 l is a silicone-modified facade paint that creates an absolutely matte surface coating. This paint is used to cover residential, commercial, industrial and warehouse premises. The LA base allows you to tint the paint in light, pastel shades. Advantages and properties of facade paint: Creates a uniformly colored, absolutely matte surface. Has good adhesion to surfaces. Suitable for mineral and plastered surfaces. The surface does not require priming before applying paint. Easy to apply and does not splash. Paint consumption reaches 4-6 m2/l. The paint has high hiding power. The surface is painted from corner to corner. Water can be used as a solvent (up to 10% of the volume). Rules application Before painting, make sure the surface is clean and dry. Also check that the air and surface temperature is above +5°C and the relative humidity is below 80%. Do not paint if the air temperature is too high or in direct sunlight. Use a roller, brush or spray gun for painting. Step-by-step paint application: clean the surface from dirt and dust; paint the surface. Drying time to the touch - 30 minutes, the next layer can be applied after 12 hours. It is recommended to paint in 1-2 layers.
from 688 hryvnias
Water-dispersion paint for plinth Hansa Sokkel
Hansa Sokkel by VIVACOLOR is a water-dispersion, weather-resistant paint designed to protect baseboards. This paint is used to cover baseboards of residential, commercial, industrial and warehouse premises. Base A allows you to tint the paint in light shades. Base C allows you to tint the paint in saturated shades. Usually the base is painted in a shade close to the color of the roof. Advantages and properties of base paint: Creates a uniformly colored matte surface. Characterized by good adhesion to different types of surfaces. Suitable for concrete and plastered surfaces, mineral slabs, galvanized surfaces and surfaces made of light metal (e.g. drainpipes, etc.). It has high dirt-repellent properties. Easy to apply and does not splash. Paint consumption: up to 10 sq.m./l when working with mineral and metal surfaces and up to 8 sq.m./l. when working with concrete and plastered surfaces. The paint has high hiding power. Water can be used as a solvent (up to 5% of the volume). Coat the base of the house or the entire facade (except for those parts that are insulated with mineral wool). The painted base will retain its beautiful appearance for a long time, will be protected from street dust and dirt, and is easy to clean. Application rules Before painting, make sure the surface is clean and dry. Also check that the air and surface temperature is within +5°C +28°C, and the relative humidity is no more than 80%. We do not recommend painting when the air temperature is too high, or in direct sunlight. Use a roller, brush or spray gun for painting. Step-by-step paint application: clean the surface from dirt and dust; prime the surface; paint the surface. Drying time to the touch - 1 hour. For maximum protection of the base, paint should be applied in two layers, with a two-hour pause.
from 598 hryvnias
Wall paint Wall 7
Wash-resistant matte interior paint that creates a silky surface. Has good adhesion and high covering ability. Suitable for amendments. Easy to apply, does not splash or drip. Wash resistance > 10 000 cycles (class 1 EN 13300 according to ISO 11998). Used for painting walls and ceilings in dry rooms. Suitable for new and previously painted concrete, plastered, brick, putty, wallpapered, plasterboard, fiberboard and chipboard surfaces. Base A allows you to get delicate pastel shades, base C - more saturated and bright. Country of origin: Finland.
from 542 hryvnias
Ceiling paint Ceiling 3
Absolutely matte water-dispersed ceiling paint. It has a high covering ability, is well leveled, white. Doesn't splash or drip. Increased drying time. It is used for painting ceilings and walls in dry rooms (bedrooms, children's rooms, guest rooms, halls, offices, residential and public spaces). Suitable for priming and painting previously unpainted plastered, concrete, brick, plasterboard and putty surfaces, fiberboard and chipboard. Country of origin: Sweden.
from 534 hryvnias
Deep matte paint with velvet effect Wall 4
Deep matt, easy-to-clean water-based paint (Class 1 EN 13300 according to ISO 11998) for interior use. Forms a smooth matte surface, helps hide minor surface defects, and gives excellent results. It is used for painting walls in dry rooms (bedrooms, children's rooms, living rooms, offices, schools, kindergartens and other public spaces). Green Line paints are certified by the Nordic Swan Ecolabel and approved by the Asthma and Allergy Association of Finland. Products contain minimal amounts of volatile organic compounds (VOCs). Country of origin: Finland.
from 614 hryvnias
Wear-resistant acrylate wall paint Acrylate Matt
Matte moisture-resistant acrylate paint for interior work, creating a silky surface. Adheses well to previously painted surfaces. The finished painted surface is wash and abrasion resistant, making it ideal for areas that require frequent cleaning. Wash resistance > 20,000 cycles (class 1 EN 13300 according to ISO 119980). Country of origin: Finland.
from 638 hryvnias
Where to buy in Ukraine
