Water-dispersed matte paint for wood and metal Universal Akva Matt

Universal Akva Matt is a water-dispersion matte paint for wood and metal, characterized by high adhesiveness and weather resistance. It is characterized by the strength and wear resistance of the coating.

Advantages of paint for wood and metal:

• Paint consumption 8-10 m2/l when used on smooth wood and metal surfaces.
• The paint can be diluted with water up to 10% of the volume.
• The paint can be used white (base A), and can also be tinted in light shades (base A).
• Drying time 1 hour - touch dry, 24 hours - before applying the next layer, 2-3 days - complete drying.
• Work is carried out at a temperature of 23˚C and a relative humidity of 50%.
• Dry residue - approximately 40%.

Preparation of previously unpainted surfaces

1. Clean the surface from dust and dirt.
2. Patch up the uneven areas with putty, sand and remove dust.

Prime porous, putty, non-uniformly absorbing surfaces, as well as plasterboard and particle boards with water-dispersion paint. Metal surfaces must be primed with metal primer. Weak surfaces covered with chalk putty should be primed with an alkyd primer.

Preparation of previously painted surfaces

1. Remove any loose paint.
2. Wash the surface with an aqueous cleaning solution, rinse with water and let dry.

Sand hard, glossy surfaces until matte, remove dust. Weak surfaces covered with chalk putty must be primed with an alkyd primer. Fill cracks and irregularities with putty, sand and remove dust. Prime the putty surfaces.

Staining conditions

The surface to be painted must be clean and dry (wood moisture content below 20%), air temperature from +5 to +28˚С, relative air humidity 80%. Do not paint in hot weather or in direct sunlight.

Universal Akva Matt paint must be thoroughly mixed before use. To obtain a uniform tone, you need to mix a sufficient amount of paint from different cans. Paint in 2 layers with a roller, brush or spray paint.